|
||
|
||
|
SPECIFICATIONS:
Thickness: .015" to .140"
Coil Weight, Max.: 40,000 Lb.
Material: Cold Rolled, Hot Rolled Pickled and Oiled Steel,
Coated Steel, Aluminum Brass and Copper
Speed: 400 to 800 FPM
Line Direction: Right-to-Left
CONSISTING OF:
(3) Coil Storage Platform
(2) Coil Storage Platform with Floor-Type V-Deck Coil Car
Stamco Mandrel Uncoiler with Hydraulic Expansion:
Coil I.D.: 16" with Leaves for 20" Expansion
Coil O.D.: 72"
4-Leaf Mandrel Design
Sliding Base
Snubber Roll Hold Down Unit
Motor Data: 75 HP DC, Horsburgh Scott Gear Box
North American Tracking Unit
Peeler Table
Entry Non-Powered Pinch Rolls
Powered Pinch Rolls
Entry Downcut Shear
Powered Pinch Rolls
(2) Stamco Slitting Heads:
Arbor Face: 53-1/2"
Arbor Diameter: 7-1/2"
Crane Removal Design
Motor Data: 150 HP DC Baldor
Dual Scrap Choppers:
Scrap Shaker and Conveyor
Motor Data: Dual 20 HP DC Reliance
Powered Pinch Rolls:
36" Table
Cascade Rolls:
(2) Top and (2) Bottom: 54" Wide
Pit Cross Over Table
Over Arm Separator Shaft
Double Drag Pad Tension Stand
Stamco Recoiler:
Coil I.D.: 16"
Coil O.D.: 72"
Mandrel: 54"
Hydraulic Push-Off
Over Arm Separator
Under Driven Snubber Roll
Motor Data: 150 HP DC Reliance, 500 to 2000 RPM
Stamco V-Type Exit Coil Car
56" L x 14" I.D. Single Arm Turnstile:
Pusher Plate
72" x 10,000 Lbs. Coil Banding Line:
Down Layer:
Horn Length: 12"
Roll Width: 74"
Powered Rolls
8' L x 74" Banding Table Section:
(2) Conical Rolls
Signode Model 20SV-5/8 Semi-Automatic
Banding Head
6" x 76" Roll Face Powered Conveyor Section
Stack Height: 18"
OD Grab Station
6-Position Carousel Station with Push-Off
(2) Exit Skid Coil Positioners
Complete Line with Shimless Tooling, Knives, Metal Spacers,
Hydraulics, Electrics, Controls, Manuals and Drawings
Installed
RETURN
to complete inventory display
RETURN
to our home page