Bass Machinery, LLC 2100 Hendon Street • Toledo, OH 43606
Phone: 419-243-2277 (BASS) • Fax: 330-299-0520
sales@bassmachinery.com

New and Used Metalworking Machinery


1 1/4"Rd. FENN MODEL 125 IMPACT CUT-OFF MACHINE WITH BAR FEED,   Our stock number: 51211

1 1/4 Rd. FENN MODEL 125 IMPACT CUT-OFF MACHINE WITH BAR FEED,

Click on picture below for larger version
1 1/4 Rd. FENN MODEL 125 IMPACT CUT-OFF MACHINE WITH BAR FEED,1 1/4 Rd. FENN MODEL 125 IMPACT CUT-OFF MACHINE WITH BAR FEED,1 1/4 Rd. FENN MODEL 125 IMPACT CUT-OFF MACHINE WITH BAR FEED,1 1/4 Rd. FENN MODEL 125 IMPACT CUT-OFF MACHINE WITH BAR FEED,
1 1/4 Rd. FENN MODEL 125 IMPACT CUT-OFF MACHINE WITH BAR FEED,1 1/4 Rd. FENN MODEL 125 IMPACT CUT-OFF MACHINE WITH BAR FEED,1 1/4 Rd. FENN MODEL 125 IMPACT CUT-OFF MACHINE WITH BAR FEED,1 1/4 Rd. FENN MODEL 125 IMPACT CUT-OFF MACHINE WITH BAR FEED,

AGE: N/A

SPECIFICATIONS:

Capacity, Solid Round: 1-1/4"
Capacity, Shapes: Equivalent Cross Section to 1-1/4"
Min. Diameter: 3/8"

Capacities are Based on Cutting Solid Mild Steel (65,000 PSI

Tensile). Capacity Varies Inversely with the Tensile Strength of

the Material. For Example if the Tensile Strength of the

Material to be Cut is 120,000 PSI the Capacity Drops to Approx.

7/8" for Round Stock & 3/4" for Square Stock.

Cut Length, Max.: 24" - To be Verified with Positive Stop
Cut Length, Min.: 1-1/2" x Dia. of Material Being Cut

(Shorter Lengths can be Achieved w/a

Compromise in Cut Quality)
Cut-Off Tolerance: +/-.005" per Mfg. - Varying w/Length,

Material & Speed
Rate of Cut: 180 Cuts Max. for Shortest Length Cut & Min.

Diameter. Rate of Cut is Less for Longer

Cut Lengths & Larger Diameters.
Main Drive Motor: 15 HP AC
Air Pressure Required: 60 PSI

EQUIPPED WITH: Micro-Adjust Positive Stop Assembly
Machine Mounted Roll Feed Unit
Semi-Automatic Lube System
Semi-Automatic Lube System

Positive Stop: The Positive Stop Assembly Controls the Length of

Cut. It is Infinitely Adjustable Up to the Cut

Length its Maximum Length. The Bar is Fed with

the Feed Rolls thru the Cut-Off Dies until it

Makes Contact with the Positive Stop Target

which Triggers the Cut. The Positive Stop Target

then Moves Up & Out of the Way of the Cut Piece

so it can Drop Down the Chute.

Roll Feed: (2) 7" Diameter Bronze Rolls Each Powered by its Own

Hydraulic Motor to Take the Bars from the Bar Feed &

Feed them thru the Dies to the Positive Stop Target

to Trigger the Cut.

Hydraulic Power Unit: the Roll Feed Motors are Powered by a

JAMTEK ENTERPRISES Variable speed

Hydraulic Power Unit Driven by a 5 HP,

1735 RPM Motor Mounted in the Base of the

Machine. The Speed is Adjusted by the

Operator Utilizing a Rotating Knob

Located Next to the Feed Rolls.

Bar Feed:
Capacity, Bar Diameter: 1-1/4"
Capacity, Bar Length: 20' Approx.
Feed Type: Hydraulically Driven Chain - Bar Drops onto

Chain & Rides to the Feed Rolls on the Impact

Cut-Off
Hydraulic Power Unit: 1 HP, 1440 RPM, GE Motor Driving a

Racine Pump w/Tank. This is a

Separate Stand Alone Unit.
Separate Stand Alone Unit.

Line Height: Approx. 40" from Floor w/Adjustments for

Leveling

Bar Feed is Designed with Level Storage on Top & an Incline Ramp

to Feed Bars to Moving Chain. The Chain Moves the Bar Forward to

Make Contact with the Feed Rolls on the Impact Cut-Off Machine.

Overall Dimensions: 8' L x 8' W x 5' High - Cut-Off
20' L x 5'8" W x 6' High - Bar Feed
Weight: 7,800 Lbs. Approx. - Cut-Off
2,000 Lbs. Approx. - Bar Feed














Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page