|
||
|
||
|
SPECIFICATIONS:
Materials: HRS, CRS, P & O
Coil I.D.: Entry - 20" to 24"
Exit - 20" and 24"
Coil O.D., Max.: 72"
Coil Width, Entry: 12" to 72"
Coil Weight, Max.: 50,000 Lb.
Thickness: Head # 1 - 0.020" to 0.187"
Head # 2 - 0.075" to 0.375"
Shear, Max.: 45,000 PSI
Yield, Max.: 45,000 PSI
Line Direction: Right-to-Left
Mode of Operation: Driven
CONSISTING OF:
L & M Entry Coil Car:
Age: 1999
Mast Type, Floor Mounted, Self-Contained Hydraulics,
Powered Lift and Traverse, Narrow Coil Retaining
Slots, Pendant Control, Cable Reel
Uncoiler:
Single Mandrel Type, Hydraulic Expansion, "Pumpkin
Tooth" Segments, Water Cooled Brake, Slide Base,
Feedup Drive, Holddown with Powered Snubber Roll,
Cooling System for Brake
Entry Unit:
Extending Blade Type Peeler, (4) Roll Coil Breaker
(8" Dia.), Powered Entry Side Guides, Inspection
Table, Powered Exit Side Guides
Crop Shear:
Down-Cut Type, Powered Temper Roll, Scrap Ramp,
Scrap Cart
Slitter Base:
10" Powered Entry Pinch Rolls, Powered Entry Side
Guides, Manually Adjustable Scrap Guides, H & S
Gearbox with 62.31:1 Ratio (.927 SF), 150 HP DC
Motor (1750/2000 RPM, 500 V)
(2) Slitter Heads:
Crane Removable Type, Powered Outboard Retraction,
Powered Top Arbor Adjust, 9" Diamter Arbors (Slitter
Head #1), 12" Dia. Arbors (Slitter Head #2)
Pit Section:
Cross Over Table
(2) .500" x 1" PRO ECO Scrap Winders:
Level Wind, Automatic Scrap Dump
Tension Stand:
Drag Type, Recoiler Feed Table
Recoiler:
20" Dia. Drum with Risers for 24", Hydraulic
Expansion and Gripper, Hydraulic Push-Off, Overarm
Separator, Lufkin Main Gearbox with 7.7:1 Ratio
Rated at 649 HP (5.2 SF), 2-Speed H & S Gearbox
with 3:1 and 1:1 Ratio (1.13 SF), 150 HP DC Motor
(650/1900 RPM)
Exit Coil Car:
Mast Type, Floor Mounted, Self-Contained Hydraulics,
Powered Lift and Traverse, Coil Stabilizing Arm,
Pendant Control, Cable Reel
(2) Arms x 50,000 Lb. Ea Exit Turnstile:
Powered Rotation, Slotted for C-Hook, Provision for
a Pull-Off Assembly
Electrical Controls:
AC and DC Control Cabinets, Drives New in 2016
Control Consoles:
Main Operators Console, Machine Mounted Auxiliary
Operators Stations
Slitter Tooling:
Knives, Rubbers, Spacers, Separator Tooling
(2) Hydraulic Power Units
Spare Parts for Recoiler Gripper
Removed and in Storage
RETURN
to complete inventory display
RETURN
to our home page