|
||
|
||
|
|
AGE: 1990
2010 Automation Upgrade by Childress Engineering Corp.
MODEL NUMBER: MC-25-F
SPECIFICATIONS:
Capable of Both Infeed and Thru-Feed
Spindle Diameter: 2-1/2"
Die Length, Max.: 4-1/2"
Thrufeed and Cut-Off:
Ball Blanks: From 1/16" to 3/8"
Roller Blanks: From 1/16" x 1/2" Long
to 5/16" x 2" Long
Bar Processing, Thrufeed, Unlimited Length:
Threaded Rod: Up to 2-1/2" Dia.
Worm Rolling: Up to 2" Dia. x 10 Diametral Pitch
Annular Forms: Up To 2-1/2" Dia.
Shallow Involute Forms: Up to 2-1/2" Dia.
Knurled or Shallow Finned Bar: Up To 2-1/2" Dia.
Rolling Operations, Infeed:
UNC Threads: Up to 2-1/4" Dia. x 4-1/2" Long
Fine Pitch Threads: Up to 3" Dia. x 5-1/2" Long
Worms: Up to 2" Dia., 10 Diametral Pitch x 3" Long
Knurls and Shallow Involute Forms: Up to 3-1/2" Dia.
x 5-1/2" Long
Annual Forms: Up to 4" Dia.
Rod Finishing and De-Nicking:
Thrufeed: Up to 2-1/2" Dia. x Unlimited Length
Infeed: Up to 4" Dia. x 5-1/2" Long
EQUIPPED WITH:
Allen-Bradley PanelView 600 Operator Interface
Complete Machine Enclosure
High Capacity Hydraulic Actuation Unit
Manual Adjustment for:
Die Pressure
External Lower Carbide Blade Guide Height
Front Work Support Height
Double Acting Automatic Arm Stabilizer
Rotary Die Match on Left Spindle
Exit Part Tube Guide Height
Main Drive Motor Belt Tension
Hydrulic Pump for Threader with Filter and Pressure Gauge
Upgraded By Childress Engineering Corporation
With Automatic Bar Feed System:
1 HP Threading Lubrication Pump with (2) Filters
Complete Proximity Sensors for Part Present
In Feed Table
Die Threading Area
Exit Table
140" Max. Auotmatic In Feed Gravity Bar Rack
With Fully Automatic Rexroth CKK Servo Feed
In Feed Pusher
120" Covered Exit Table With Lubrication Drain Back
To Threader With Pusher Discharge System
To Finished
10' Product Inspection Table
Graco G3 Automatic Grease Threader Lubrication System
Finished Product Holding and Inspection Table
Work Light
Digital Copy of PLC Program
Installation and Operation Manuals
Main Shaft, Gear Box Assy. Blue Prints
(2) Spare Spindles and Bearings, 2-1/2" Dia. x
4-1/2" Die Space
Spare, New, Leeson WattSaver 30 HP Motor
NEW TODAY PER KINEFAC, CURRENT CONFIGURATION: ~$250,000
MOTOR DATA: 30 HP 3 Phase Induction Spindle Motor, 230/460 Volt
OVERALL DIMENSIONS: Input Table - 60" x 120" x 56" High
V Input Table - 32" x 156" x 56" High
Machine - 40" x 72" x 70" High
Coolant - 26" x 60" x 48" High
Electrical - 18" x 36" x 80" High
V Output Table - 32" x 132" x 56" High
Output Table - 72" x 152" x 64" High
WEIGHT: Input Table - 550 Lbs.
V Input Table - 250 Lbs.
Machine - 2,300 Lbs.
Coolant - 400 Lbs.
Electrical - 1,100 Lbs.
V Output Table - 250 Lbs.
Output Table - 550 Lbs.
CONDITION: Good, Taken Directly From Service
Single Owner Machine
Was Running When Plant Was Closed and Auctioned
Was Maintained At Regular Intervals, Which
Included Complete Machine Inspection,
and Rebuilt As Needed By Kinefac
RETURN
to complete inventory display
RETURN
to our home page