Bass Machinery, LLC 2100 Hendon Street • Toledo, OH 43606
Phone: 419-243-2277 (BASS) • Fax: 330-299-0520
sales@bassmachinery.com

New and Used Metalworking Machinery


1-1/2" PINES 15 "Dynacut" Tube Cut-Off, 2-1/2" to 11' Length, 6000 PPH, 5 HP   Our stock number: 49444

1-1/2 PINES 15 Dynacut Tube Cut-Off, 2-1/2 to 11' Length, 6000 PPH, 5 HP


Click on picture below for larger version
1-1/2 PINES 15 Dynacut Tube Cut-Off, 2-1/2 to 11' Length, 6000 PPH, 5 HP1-1/2 PINES 15 Dynacut Tube Cut-Off, 2-1/2 to 11' Length, 6000 PPH, 5 HP1-1/2 PINES 15 Dynacut Tube Cut-Off, 2-1/2 to 11' Length, 6000 PPH, 5 HP1-1/2 PINES 15 Dynacut Tube Cut-Off, 2-1/2 to 11' Length, 6000 PPH, 5 HP
1-1/2 PINES 15 Dynacut Tube Cut-Off, 2-1/2 to 11' Length, 6000 PPH, 5 HP1-1/2 PINES 15 Dynacut Tube Cut-Off, 2-1/2 to 11' Length, 6000 PPH, 5 HP1-1/2 PINES 15 Dynacut Tube Cut-Off, 2-1/2 to 11' Length, 6000 PPH, 5 HP1-1/2 PINES 15 Dynacut Tube Cut-Off, 2-1/2 to 11' Length, 6000 PPH, 5 HP

AGE: 1979

SPECIFICATIONS:

Grieder Type Cut (Nick & Shear) - Dimple Free
Will Cut Rounds, Squares and Shapes (Tubular)

Capacity, Round Tube: 1/8" to 1-1/2" O.D.
Wall Thickness, Max.: .065"

Cut Length: 2-1/2" to 11'

Production: Up to 6,000 Parts Per Hour
1/2 Second Cutting Time

Cut Accuracy to .005"

Two Speed Feed, High Speed, Then Low Speed Into End Stop
To Eliminate Tube Bounce Off Of End Stop To Improve Cut
Length Accuracy, Adjustable Feed Speeds

EQUIPPED WITH:

24' Random Length Gravity Feed Rack With Fully Automatic

Tube Loading And Adjustable Length Trim Cut

Fully Automatic Tube Guide Rolls Along The Entire Length Of
The Runout That Guides The Tube To The End Stop And
Then Automatically Opens After The Cut And Drops The
Cut Tube

Minster Air Clutch

Miscellaneous Spacers, Vertical Blades &
Horizontal Scarfing

TOOLING:

5/32 - (1) L 3/16 - (2) L, (1) S
1/4 - (3) L, (2) S 5/16 - (1) L
3/8 - (2) L, (2) S 7/16 - (1) S
1/2 - (1) L, (2) S 9/16 - (1) L
5/8 - (1) L 3/4 - (3) L, (1) S
7/8 - (1) L 1 - (2) L, (1) S
1-1/4 - (1) L, (1) S 1-1/2 - (1) S

L = Long Set
S = Short Set (Short Sets Allow The End Stop To Come
Closer To The Cut-Off Blade Allowing
For Cut-Off Of Short Parts)


NOTE:

Fully Supported By Original Manufacturer
New Tooling Can Be Built On Request
Blades / Feed Rolls In Stock

MOTOR DATA: 5 HP, 230/460/60/3

WEIGHT: 6,000 Lbs.

At Location ........................... Toledo, OH
Photos Available

Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page