|
||
![]() |
![]() ![]() |
AGE: 1965
SPECIFICATIONS:
Bending Capacity: 5/8" x 12'
Overall Die Surface: 14'
Open Height: 22"
Closed Height: 10"
Distance Between Housings: 12'2"
Throat Depth: 14"
Stroke: 12"
Advance Speed: 93, 44, 17 IPM
Return Speed: 89, 36 IPM
Main Cylinder: 20" Bore x 12" Stroke
Ram: 4" x 80" x 168"
Bed: 4" x 70" x 172"
Fixed Lower Platen: 6" x 10" x 168" w/5/8" Key w/5 1/2"
High Front and Rear Faces
Bed Height Above Floor: 42 1/2"
Depth Below Floor: 32"
EQUIPPED WITH:
High Speed / Normal Press Speed Adjustable Position Cam
3-Position Advance (Dependent Upon Cam Position):
Rapid / Normal
Normal / Normal
Fast Press (Reduced Tonnage) / Normal Press
2-Position Return (Dependent Upon Cam Position):
Fast Return / Fast Return
Slow Return / Fast Return
Micrometer Adjustment For Bottom Of Stroke Stop Position
Hardened Ram Inserts, C-1050 Steel
Tonnage Indicators
Lower 4-Way Die Holder
American-Style Clamping
Section-Type Ram Clamps, Manual)
Dual Palm-Buttons With E-Stop
Updated Ram Stop Positioning
Updated Tonage Control
MOTOR DATA: 50 HP Double Ended Motor With (2) Vickers Pumps
220/440/60/3, 1800 RPM
Setup For 480 Volts
Over-all Dimensions: 7' F-B
WEIGHT: 73,000 Lbs.
CONDITION: Good Running
Upgraded By Pacific In 2013
Rebuilt The Pumps, Calibrated The Leveling System
And Upgraded With A Solenoid Valve
Ran Less Than 20 Hours A Week
RETURN
to complete inventory display
RETURN
to our home page