|
||
![]() |
AGE: N/A
SPECIFICATIONS:
Capacity, Solid Round: 1-1/4"
Capacity, Shapes: Equivalent Cross Section to 1-1/4"
Min. Diameter: 3/8"
Capacities are Based on Cutting Solid Mild Steel (65,000 PSI
Tensile). Capacity Varies Inversely with the Tensile Strength of
the Material. For Example if the Tensile Strength of the
Material to be Cut is 120,000 PSI the Capacity Drops to Approx.
7/8" for Round Stock & 3/4" for Square Stock.
Cut Length, Max.: 24" - To be Verified with Positive Stop
Cut Length, Min.: 1-1/2" x Dia. of Material Being Cut
(Shorter Lengths can be Achieved w/a
Compromise in Cut Quality)
Cut-Off Tolerance: +/-.005" per Mfg. - Varying w/Length,
Material & Speed
Rate of Cut: 180 Cuts Max. for Shortest Length Cut & Min.
Diameter. Rate of Cut is Less for Longer
Cut Lengths & Larger Diameters.
Main Drive Motor: 15 HP AC
Air Pressure Required: 60 PSI
EQUIPPED WITH: Micro-Adjust Positive Stop Assembly
Machine Mounted Roll Feed Unit
Semi-Automatic Lube System
Semi-Automatic Lube System
Positive Stop: The Positive Stop Assembly Controls the Length of
Cut. It is Infinitely Adjustable Up to the Cut
Length its Maximum Length. The Bar is Fed with
the Feed Rolls thru the Cut-Off Dies until it
Makes Contact with the Positive Stop Target
which Triggers the Cut. The Positive Stop Target
then Moves Up & Out of the Way of the Cut Piece
so it can Drop Down the Chute.
Roll Feed: (2) 7" Diameter Bronze Rolls Each Powered by its Own
Hydraulic Motor to Take the Bars from the Bar Feed &
Feed them thru the Dies to the Positive Stop Target
to Trigger the Cut.
Hydraulic Power Unit: the Roll Feed Motors are Powered by a
JAMTEK ENTERPRISES Variable speed
Hydraulic Power Unit Driven by a 5 HP,
1735 RPM Motor Mounted in the Base of the
Machine. The Speed is Adjusted by the
Operator Utilizing a Rotating Knob
Located Next to the Feed Rolls.
Bar Feed:
Capacity, Bar Diameter: 1-1/4"
Capacity, Bar Length: 20' Approx.
Feed Type: Hydraulically Driven Chain - Bar Drops onto
Chain & Rides to the Feed Rolls on the Impact
Cut-Off
Hydraulic Power Unit: 1 HP, 1440 RPM, GE Motor Driving a
Racine Pump w/Tank. This is a
Separate Stand Alone Unit.
Separate Stand Alone Unit.
Line Height: Approx. 40" from Floor w/Adjustments for
Leveling
Bar Feed is Designed with Level Storage on Top & an Incline Ramp
to Feed Bars to Moving Chain. The Chain Moves the Bar Forward to
Make Contact with the Feed Rolls on the Impact Cut-Off Machine.
Overall Dimensions: 8' L x 8' W x 5' High - Cut-Off
20' L x 5'8" W x 6' High - Bar Feed
Weight: 7,800 Lbs. Approx. - Cut-Off
2,000 Lbs. Approx. - Bar Feed
RETURN
to complete inventory display
RETURN
to our home page