|
||
|
||
|
AGE: 1978
SPECIFICATIONS:
Number of Str. Rolls: 3 over 4 plus 1
Max. Straightening Travel: 122'
Max. Dia. of Straight. Material for Mpa. Rated: 4"
Max. Dia. of Straight. Material for 300 Mpa. Actual: 5"
Axial Adjust. of All Rolls: 1.60"
Max. Vertical Adjust. of Upper Rolls: 4.70"
Max. Sideway Adjust. of Final Roll: 4.70"
Straightening Speed 40 IPM: 24; 48; 60; 120
Max. Admissible Bending of Bars before Straight.: 0.472"
Max. Admissible Bending of Bars after Straight.: 0.196"
Length of Non-Straightening Rod Ends: 25"
Max. Yield Limit of Straightening Material: 750 Mpa.
Max. Amount of Resistance for 300 Mpa.: 100 cm
Circular Profile, Min/Max.: 50/10
4-Face (45 Deg.) Min/Max.: 50/100
6-Face, Min/Max.: 50/100
Plane (45 Deg.) Min/Max.: 80 x 20 / 150 x 40
Plane Profile, Min/Max.: 100 x 30 / 410 x 25
Profile (45 Deg.), Min/Max.: 80/160
Channel Type, Min/Max.: 14/24
2 T-Shaped, Min/Max.: 8/14
No. of Straightening Rolls & Final Rolls: 8
Max. External Dia. of Straightening Rolls: 23.60"
Spacing Between Straightening Rolls: 24.80"
Pressure on Basis: 770 kPa
Motor Data: 70 HP, 480/260/3/60 - Lower Roll Motor
36 HP, 480/260/3/60 - Auxiliary Electric Motor
36 HP, 480/260/3/60 - Auxiliary Electric Motor
NOTE: Tooled for Angle Iron.
Overall Dimensions: 174" L x 109" W x 129" High
Weight: 98,000 Lbs. Approx.
Condition: GOOD
At Location....................................................
**PHOTO AVAILABLE
RETURN
to complete inventory display
RETURN
to our home page