|
AGE: 1978, Rebuilt in 1998
Originally built for Nelson Steel & Wire. It was used to point
coiled rod coming off of a horizontal payoff going to a vertical
bull block. Pointer slides into alignment between payoff and
drawer to point the coil then slides back out of the way.
SPECIFICATIONS:
Capacity: Rated - 33,000 Lbs. @ 1989 PSI
Maximum - 41,480 Lbs. @ 2500 PSI
Automatic Cycle:
(1) or (2) Die Reduction in Point Mode or Nibble Mode:
Die #1: Up to 4 Nibble Strokes
Die #2: Up to 4 Nibble Strokes
Pointing Speeds: Advance - 212 IPM @ 2000 PSI
Return - 271 IPM @ 1000 PSI
Die Holder: 2-Hole Rotary W/4.010" Round x 2-9/32" Deep Cavities
Point Length: Automatic By (3) Position Selector Switch
Maximum Travel of Dies: 12"
Length of Gripper Jaws: 13"
Die Index Mechanism: Hydraulic Cylinder
Clamping Mechanism: Hydraulic Cylinder & Double Toggle
Traverse Mechanism: Hydraulic Motor
Tube Gripper Jaws: Octagonal - Quick Rotate Type (8 Sided)
Current Grip Sizes: .625", .687", .750", .812", .875",
.937", 1", 1.062"
Current Est. Pointing Dies for Taking 1-1/16" Down to 7/8" in (2)
Hits.
Hits.
EQUIPPED WITH: Push-Button & Controls; Vickers Pumps & Valves;
MOTOR DATA: Hydraulic - 20 HP Reliance, 230/460/60/3-1160 RPM
Coolant - 1/2 HP Reliance, 230/460/60/3-1140 RPM
O.A. DIMENSIONS: 6' W x 11'4" L x 6'2" High
WEIGHT: 6,900# - Approx.
NOTE: Machines appears to be nearly unused since 1998 rebuild.
Loaded on Truck.................Toledo, (Hendon St. Whse.) OH
**PHOTO & PRINTS AVAILABLE
RETURN
to complete inventory display
RETURN
to our home page