AGE: N/A

Diameter Range: .125" to 3.750"
Length Range: up to 16" Depending on Bore Diameter

Spindle Speeds, Hi Range: 800, 1000, 1270, 1600, 2000, 2500
Low Range: 200, 250, 320, 400, 500, 640

Max. Dia. of Work Piece, Through Holding Fixture: 4"
Note: Other Arrangements Could Hold Larger Parts

Stroking Speeds: 80, 110, 160, 220, 310 Per Min.
Note: The Work Piece is The Moving (Stroking) Part

Setup Time: Approx. 10 to 20 Min.

Current Mandrel Installed: #2H-P28-2000W (Honing Length 9")
Note: Assembled With One Stone & One Shoe

Capable of 1.855" to 2.625" Dia. Bore
Having a Stone Size of, 3-1/4" L x 1/4" W

Note: Machine is Cable of Auto Shut Off, But Fixture is Missing

Honing Oil Capacity: 25 Gallons

EQUIPPED WITH:
Self Contained Filter System: Filter Element #PF-105-4
Operators Controls: Stroke Manual/Power, Hone Start/Stop
Operators Controls: Stroke Manual/Power, Hone Start/Stop
MOTOR DATA:
Spindle Motor, 1 HP, 230/460/3/60
Stroking Motor, 1/2 HP, 230/460/3/60
Honing Oil Pump Motor, 1/2 HP. 230/460/3/60
NOTE: Machine Is Setup to Run on 460 Volts, 3 Phase, 60 Hz

OVERALL DIMENSIONS: 49" W x 72" L x 67" H
WEIGHT: 1,150# Approximate

CONDITION: Will Clean, Paint & Operate Under Power at Our Shop

FCA, As Is.............Toledo, Ohio (Hendon Street Warehouse)

*PHOTO & CATALOGUE INFO AVAILABLE

RETURN to complete inventory display       RETURN to our home page